Skip to content

Jouni Prints & Mills

A guy from Finland bought 3D-printer. Year later he bought a CNC mill. And he is posting many of his prints and mills here.

  • Home
  • My CNC mill
  • My standards
  • Self balancing robot revisited

Golden ratio gauge

  

This entry was posted in Yleinen on 1.2.2017 by admin.

Post navigation

← Porridge cooler Aggroquad 4″ 1407-motor racer →

About

Ultimaker 3D-printer since July 2013. 6040 CNC mill since July 2014. Located at Tampere, Finland.
Contact me at: j...@gmail.com (using reCAPTCHA Mailhide API)

Recent Posts

  • Pinhole camera for RB67 back (pinhole day 2021)
  • DIY wooden 6×17 film camera
  • CNC milled wooden pinhole camera
  • x
  • x
  • x
  • x
  • x
  • x
  • CNC milled wooden truck
  • CNC cut micro slingshot ala Joerg Sprave
  • Karies
  • Self balancing “robot” revisited
  • Milling mysteries #1
  • Aggroquad 4″ 1407-motor racer
  • Golden ratio gauge
  • Porridge cooler
  • RealAcc X210 antenna reinforcement mod
  • Lady Owl
  • rara: reincarnational X-shaped quad
  • ifelse – X-shape racing quad
  • First not-my-own milling
  • Turning CNC mill into a cutter (with a 3D printer)    
  • CNC milling / carving copper PCB
  • Ulkomaalainen – FPV racing quad
  • 41th print: Replacement part for Ikea blinds
  • Naarmuton, a 180 size FPV quadcopter
  • M.O.S.K.A
  • Propeller protector for Teksumo
  • Mobius & Sony HAD camera mount with tilt
  • First carbon fiber milling: Akroquad – a 210mm quadcopter
  • 250 racing quad
  • Milling PCB at high resolution
  • Mini wooden tricopter
  • Plywood folding quad for Naza with lights
  • Milling PCB in good quality
  • Milling PCB for DIY synth
  • Harmonic keyboard
  • Fift milling: “250”-quad of birch plywood
  • G-code fixing tool
  • Fourth milling: Drilled PCB
  • Third milling: support for garden hose
  • Second milling: Finger joint plywood box
  • First milling: calibration ruler
  • 40th print: bike planter
  • 39th print: Spheric Quadcopter
  • 38th print: Wheels
  • 37th print: Two wheeled balancing robot
  • 36th print: stretchy bracelet with auto eject
  • 35th print: Meissner Tetrahedron

Archives

  • April 2021
  • January 2021
  • May 2020
  • January 2020
  • May 2019
  • August 2018
  • April 2018
  • November 2017
  • October 2017
  • August 2017
  • February 2017
  • January 2017
  • September 2016
  • July 2016
  • May 2016
  • April 2016
  • October 2015
  • September 2015
  • August 2015
  • April 2015
  • March 2015
  • January 2015
  • December 2014
  • November 2014
  • August 2014
  • May 2014
  • January 2014
  • December 2013
  • November 2013
  • October 2013
  • September 2013
  • August 2013
  • July 2013
Proudly powered by WordPress