Second milling: Finger joint plywood box

 

My first adventures in the land of CNC milling was to make a wooden box. I’ve always liked boxes, finger joints and computers. Don’t ask me why.

However the problem with CNC milling is that inner edges tend to come round – for some strange reason. On a finger joint it causes problems; the pieces won’t go to the very end of the joint.

I overcome this by making a little “notch” at the inner edges (see images below). So I wrote a PHP script that generates a PDF that I can use when generating toolpath for the machine. Now I can make different size boxes with just changing few parameters!

IMG_3742.JPG

IMG_3738.JPG

IMG_3739.JPG

Näyttökuva 2014-8-13 kello 20.57.27